Qualified Products Home
641-Concrete Strain Poles

A ) Service Pole (Direct Burial)
Type P-2 Service pole; 18-foot Precast, Prestressed Solid Concrete Pole from a manufacturing plant that is currently on the FDOT QPL list of Procedures with Accepted Quality Control Programs; w/ 6 foot burial depth; pole taper = 0.162 in/ft; #6 Cooper Ground Wire; Chamfer corners; Concrete Strength; 4,000 PSI (Release); 6000 Ultimate (28 days). (per FDOT QPL requirements and specifications for Type P-2 Service pole; Prestress ASTM A416, Rebar ASTM A615)
FDOT_APL_NOAPPROVALMANUFACTURERDEVICE_DESCRIPTION
S641-070009/25/2009Dura-Stress inc.Type P-II (Service Pole) / Burial Depth**

**Note: Service Pole require 12-foot pole height above finish grade - direct burial depth 6'-0" May require installation with a Concrete foundation depending on soil conditions. Soil bearing capacity should be at least 1000 lb/sq in.

Contractor required to provide complete Pole Submittal Data and Calculations signed and sealed by a Florida Registered P.E. for Approval on FDOT Projects

B ) Service Pole (Backfilled w/Concrete**)
Type P-2 Service pole; 16-foot Precast, Prestressed Solid Concrete Pole from a manufacturing plant that is currently on the FDOT QPL list of Producers with Accepted Quality Control Programs; w/ 4 foot burial depth may require a concrete foundation; pole taper = 0.162 in/ft; #6 Copper Ground Wire; Chamfer corners; Concrete Strength: 4,000 PSI (Release); 6,000 Ultimate (28 days(Per FDOT QPL requirements and specifications for Type P-2 Service pole; Prestress ASTM A416, Rebar ASTM A615)
FDOT_APL_NOAPPROVALMANUFACTURERDEVICE_DESCRIPTION
S641-010004/06/2009Accord IndustriesFDOT Type P-2 SER / 870-P200-016 / Burial Depth**
S641-070009/25/2009Dura-Stress inc.Type P-II (Service Pole) / Burial Depth**

** Note: Service Pole require 12-foot pole height above finish grade - May require installation backfilled with Concrete depending on soil conditions. Soil bearing capacity should be at least 1000 lb/sq in.

Contractor required to provide complete Pole Submittal Data and Calculations signed and sealed by a Florida Registered P.E. for Approval on FDOT Projects

C ) Span Wire Pole
Precast, Prestressed Concrete Poles from a manufacturing plant that is currently on the FDOT QPL list of Producers with Accepted Quality Control Programs; Permanently and legibly marked in accordance with FDOT Design Standards (DS), Index 17725, including the date cast. Markings on Load Face side of pole.

Contractor required to provide complete Pole Submittal Data and Calculations signed and sealed by a Florida Registered P.E. for Approval



Accord Industrieswww.accordindustries.com
Dura-Stress inc.www.dura-stress.com


HISTORY:
Addition of Concrete Service Pole; Accord Industries & Dura-Stress Inc. to QPL (02-01-11)
List of FDOT Concrete Pole Manufacturers to QPL (02-01-11)

Last Modified on : 6/13/2012 12:46:04 PM