Qualified Products Home
659-Signal Head Auxiliaries

A ) Vehicle Signal Top/Bottom Bracket Assembly
Cast Aluminum; Color: Black; w/Stainless Steel hardware
FDOT_APL_NOAPPROVALMANUFACTURERDEVICE_DESCRIPTION
6591024040801305/14/1982Cost Cast Inc.PN 1902/2-Way (Top)
6591024040801305/14/1982Cost Cast Inc.PN 1902B/2-Way (Bottom)
6591024040802305/14/1982Cost Cast Inc.PN 1903/3-Way (Top)
6591024040802305/14/1982Cost Cast Inc.PN 1903B/3-Way (Bottom)
6591024040803305/14/1982Cost Cast Inc.PN 1904/4-Way (Top)
6591024040803305/14/1982Cost Cast Inc.PN 1904B/4-Way (Bottom)
6591024080802305/14/1982Engineered Castings Inc.PN 2021/2-Way (Bottom)
6591024080803305/14/1982Engineered Castings Inc.PN 2022/2-Way (Top)
6591024080804305/14/1982Engineered Castings Inc.PN 2031/3-Way (Bottom)
6591024080805305/14/1982Engineered Castings Inc.PN 2032/3-Way (Top)
6591024080806305/14/1982Engineered Castings Inc.PN 2041/4-Way (Bottom)
6591024080807305/14/1982Engineered Castings Inc.PN 2042/4-Way (Top)
6591024201105102/21/1991Pelco Products Inc.SP-1015-FL/3-Way (Top)
6591024201106102/21/1991Pelco Products Inc.SP-1016-FL/3-Way (Bottom)
6591024201107102/21/1991Pelco Products Inc.SP-1017-FL/4-Way (Top)
6591024201108102/21/1991Pelco Products Inc.SP-1018-FL/4-Way (Bottom)
6591024201103308/15/1988Pelco Products Inc.SP-1026-FL/2-Way (Top)
6591024201104308/15/1988Pelco Products Inc.SP-1027-FL/2-Way (Bottom)

B ) Single Door Disconnect Hanger w/ Tri-Stud Hub Plate
Cast Aluminum; 18 circuit; Top & Bottom Shurlock Boss Serrations; Color: Black; w/Stainless Steel hardware;
For span wire (Rev. 11/11)
FDOT_APL_NOAPPROVALMANUFACTURERDEVICE_DESCRIPTION
6591025040802105/14/1982Cost Cast Inc.PN 1901T
6591025080803108/06/1982Engineered Castings Inc.PN 1150-18T w/ PN 2152-T
6591025201102102/04/1987Pelco Products Inc.SP-1022-FL

C ) Pivotal Adjustable Signal Hanger Assembly w/1/2 - inch Stud
Cast Aluminum; Color: Natural Aluminum Finish; Complete with Aluminum: 6-inch Clamp, Disconnect and Signal Head Reinforcement Plates, Vehicle Signal Top Bracket Reinforcement Plate, Spacers, Shims; Stainless Steel hardware and fasteners; For span wire (Rev. 11/11)
FDOT_APL_NOAPPROVALMANUFACTURERDEVICE_DESCRIPTION
6591035201101309/22/1987Pelco Products Inc.SE-0507-72/Ext. Bar
6591020040801310/12/2007Signal Safe Inc.(w/Cost Cast)PN 8880/For Existing 2-Point Span Wire

D ) Adjustable Signal Hanger w/Tri-Stud
Cast Aluminum; Color: Natural Aluminum Finish; w/Stainless Steel hardware and 1-inch Cable Clamp;For span wire (Rev. 11/11)
FDOT_APL_NOAPPROVALMANUFACTURERDEVICE_DESCRIPTION
6591026040803305/13/1983Cost Cast Inc.PN 1906/Adjustable Hanger
6591035040804305/13/1983Cost Cast Inc.PN 1906E/Ext. Bar
6591026080801305/14/1982Engineered Castings Inc.PN 2075-T/Adjustable Hanger
6591035080801305/24/1983Engineered Castings Inc.PN 2076/Ext. Bar 6061-T6 Alloy
6591026201102304/02/1993Pelco Products Inc.SP-1029-FL/Adjustable Hanger

E ) Adjustable Wire Entrance Hanger w/Tri-Stud
Cast Aluminum; Color: Natural Aluminum Finish; w/Stainless Steel hardware and 1- inch Cable Clamp; For span wire (Rev. 11/11)
FDOT_APL_NOAPPROVALMANUFACTURERDEVICE_DESCRIPTION
6591035080801305/24/1983Engineered Castings Inc.PN 2076/Ext. Bar 6061-T6 Alloy
6591023080804308/06/1982Engineered Castings Inc.PN 2083-T/Adj. Hanger w/Single Ent.
6591023080805308/06/1982Engineered Castings Inc.PN 2085-T/Adj. Hanger w/Dual Ent.

F ) Wire Entrance Hanger w/Tri-Stud
Cast Aluminum; Color: Natural Aluminum Finish; w/Stainless Steel hardware and stainless steel bushing;For span wire (Rev. 11/11)
FDOT_APL_NOAPPROVALMANUFACTURERDEVICE_DESCRIPTION
6591023040801305/14/1982Cost Cast Inc.PN 1976T/w/Single Entrance;1 bushing
6591023080801308/06/1982Engineered Castings Inc.PN 2084-T1/w/Single Entrance;1 bushing
6591023080801308/06/1982Engineered Castings Inc.PN 2084-T3/w/Single Entrance;3 bushing
6591023080806308/06/1982Engineered Castings Inc.PN 2087-T/w/Dual Entrance;1 bushing

G ) Span Wire Hanger w/ Stainless Steel Bushing (Saddle)
Cast Aluminum; Color: Natural Aluminum Finish; w/Stainless Steel hardware and stainless steel bushing
FDOT_APL_NOAPPROVALMANUFACTURERDEVICE_DESCRIPTION
6591015040801308/18/1982Cost Cast Inc.PN 1909/Hanger w/ bushing
6591015080801308/06/1982Engineered Castings Inc.PN 2079-SSB/Hanger w/ bushing

H ) Horizontal/Vertical Mast Arm Signal Hanger (1, 2, 3, 4, or 5 Sections)
Cast Aluminum; Color: Natural Aluminum Finish; w/Stainless Steel hardware and aircraft cables
FDOT_APL_NOAPPROVALMANUFACTURERDEVICE_DESCRIPTION
6591024040814306/11/1997Cost Cast Inc.PN 1916-D
6591024080812306/27/1986Engineered Castings Inc.PN 3075
6591924201105306/23/2014Pelco Products Inc.SP-1006-FL

I ) IISNS and IISS Mast Arm Hanger
Cast Aluminum; Color: Natural Aluminum Finish; w/Stainless Steel hardware and aircraft cables; For mast arm or mast mount (Rev. 11/11)
FDOT_APL_NOAPPROVALMANUFACTURERDEVICE_DESCRIPTION
6591024040814306/11/1997Cost Cast Inc.PN 1916-M
6591024080812306/27/1986Engineered Castings Inc.PN 3075
6591924201105306/23/2014Pelco Products Inc.SP-1006-FL

J ) Slip Fitter
Cast Aluminum; Color: Natural Aluminum Finish; w/ minimum three (3) Stainless Steel set screws; For pedestal mount (Rev. 11/11)
FDOT_APL_NOAPPROVALMANUFACTURERDEVICE_DESCRIPTION
6591031040802308/18/1982Cost Cast Inc.PN 1910/For use w/ 4-1/2" O.D. Alum. Tube
6591031080801308/06/1982Engineered Castings Inc.PN 3004-T/For use w/ 4-1/2" O.D. Alum. Tube
6591031201104304/02/1993Pelco Products Inc.PN SP-1034-FL/For use w/ 4-1/2" O.D. Alum. Tube

K ) Aluminum Pedestal
Spun Aluminum tube (Standard) - use w/Pedestrian Heads, Vehicular Heads and Flashers; Color: Natural Aluminum Finish; 4 inch – 8 NPT either Schedule 40 or Schedule 80 as specified by Engineer to meet specific loading requirements ; Installation of pedestal requires a pedestal base, refer to item “L” Square Aluminum Pedestal Base; Solar Powered installations require a reinforcing collar, refer to item “M” Pole & Base Collar Assembly (Rev. 07/14)

Spun Aluminum tube (Special) - Required for use with Electronic Speed Feedback Signage (ESFS); Color: Natural Aluminum Finish; Schedule 40; 6-inch O.D. x 0.280 inch; No Threads; FDOT approved U-bolts w/lock washers and nuts for mounting signage to pedestals ( ASTM A-307); Installation of pedestal requires special base and footing per FDOT Index 11860, refer to item “S”, Aluminum Pedestal Slip Base, on next page
(Rev. 11/11)
FDOT_APL_NOAPPROVALMANUFACTURERDEVICE_DESCRIPTION
N/A10/28/2011Eastern Metal Supply17-DOT-140/D.O.T. Round Tube 6061-T6 - Stds.19 / 6” OD
N/A11/03/2011Eastern Metal SupplyDOT-6-UBOLT/6-inch U-bolts w/ lock washers & nuts
N/A07/11/2014Pelco Products Inc.PB-5100
N/A07/11/2014Pelco Products Inc.PB-5102

L ) Square Aluminum Pedestal Base
Cast Aluminum; Color: Natural Aluminum Finish; Alum. Access door; Ground lug; Stainless Steel hardware; Refer to item “R” for required anchor bolts (AASHTO Certified / FHWA Approval) (Rev. 07/14)
FDOT_APL_NOAPPROVALMANUFACTURERDEVICE_DESCRIPTION
N/A07/11/2014Pelco Products Inc.PB-5334-NL-GL-PNC

M ) Pole & Base Collar Assembly **
Cast Aluminum; Color: Natural Aluminum Finish; Reinforcing collar for use with new or retro-fit installation onto a Square Aluminum Pedestal Base (T-Base) with 4-1/2 inch O.D. Aluminum tube connection; required for use with all pedestal mounted Solar Powered installations (School Zone Warning and Hazard Warning Beacons) (Rev. 11/11)
FDOT_APL_NOAPPROVALMANUFACTURERDEVICE_DESCRIPTION
7465066660301101/12/2000Pelco Products Inc.PB-5325

** NOTES:
1) Required use on all SOLAR POWERED Pedestal Base Assemblies using Items “K” and “L” as specified above.
2) Refer to Item “P”, Precast Concrete Pedestal Base, on next page for T-Base SOLAR POWERED installations.


N ) Backplates w/Retroreflective Borders
Sheet Aluminum 0.0625 with 5-inch border width, mounting slots and louvers; Color: Flat Black (Powder Coat); configured to accommodate 12-inch signal head w/1 to 5 Sections In-line and 5 Section Cluster; with 2-inch wide Type VIII Yellow Retroreflective Sheeting attached to Face; complete w/ Stainless Steel hardware, 10-24x3/8 Truss Combo Type F and Washer; For limited use at selected locations only; (Federal Standard 595A-37038 for dull black and ASTM E1347)
FDOT_APL_NOAPPROVALMANUFACTURERDEVICE_DESCRIPTION
6591333161801307/20/2009McCain Traffic SupplyModel M6 Series
6591333260801105/12/2010Transportation Control SystemsBP-5000B Series

O ) CCD Camera Mount Mast Arm Bracket
For use with Vehicle Detector (Section 660, item “C” Video); Cast Aluminum; Color: Natural Aluminum Finish; w/Stainless Steel hardware and aircraft cables; 74-inch maximum length internally reinforced aluminum tube
FDOT_APL_NOAPPROVALMANUFACTURERDEVICE_DESCRIPTION
6591024080812306/27/1986Engineered Castings Inc.PN 3075-CM
6591924201105306/23/2014Pelco Products Inc.SP-1006-FL/w/SH-0514-PNC

P ) Precast Concrete Pedestal Base
Precast concrete foundation required for use with T-base installed Solar Powered pedestal mounted Flashing Beacons (School Zone Warning and Hazard Warning Beacons); 2.5 ft x 7.0 ft cylindrical foundation; FDOT Class I concrete, minimum 3000 psi at 28 days; Precast Foundation manufactured by an FDOT approved Facility; (Reinforcing ASTM A615, Grade 60; Anchor Bolts ASTM F1554, Grade 55 Hot-Dipped Galvanized)
FDOT_APL_NOAPPROVALMANUFACTURERDEVICE_DESCRIPTION
IPC-01205/31/2011Thompson Manufacturing Inc.Red Light Camera Pole Foundation / (05/17/11)

Q ) Signal Head Closure Kit
Weatherproof closure assembly to seal standard 2-inch opening(s); for use with vehicular signal heads, pedestrian signal heads, illuminated sign housings and aluminum cabinets; Aluminum with stainless steel hardware and gasket; Color: Match Housing color.
FDOT_APL_NOAPPROVALMANUFACTURERDEVICE_DESCRIPTION
N/A09/20/2011Pelco Products Inc.SP-1077-FL

R ) Anchor Bolts for Aluminum T-Base
Galvanized steel “J” shape anchor bolts, four (4) each required for Square Aluminum Pedestal Base (T-Base), item “L”; “3/4”-10NC, 18-inch long w/ 3-inch hook; threaded top 3-inches; complete with galvanized washers and nuts (ASTM A-307)
FDOT_APL_NOAPPROVALMANUFACTURERDEVICE_DESCRIPTION
N/A10/25/2011Pelco Products Inc.PB-5306

S ) Aluminum Pedestal Slip Base (Break-Away Base)
Cast Aluminum; Color: Natural Aluminum Finish; Aluminum sleeve and base plates (double beveled slots), Aluminum bolt keeper plates, shall be fabricated and assembled per FDOT Index 11860 for Single Column Ground Signs for use with 6-inch OD Spun Aluminum tube; Required for use with Electronic Speed Feedback Signage (ESFS) stand-alone or in combination with School Zone Flashers (Compliant with NCHRP 350)
FDOT_APL_NOAPPROVALMANUFACTURERDEVICE_DESCRIPTION
N/A11/03/2011Eastern Metal SupplyDOT-6-BPB PKG/Sign Pole Base w/(DOT-6-KIT) Bolt Kits

NOTE:
In addition to the FDOT standard requiring galvanized sleeve bolts for securing the Aluminum Pedestal Slip Bases (“S”) to the 6-inch O.D. Aluminum Pedestal Tube (“K) the Pedestal shall be continuously welded to the Slip Base, using Heliarc Welding method, for PWWM acceptance. (AWS G4 Certified Welder)


T ) Hub Plate Side of Pole (Pole End)
Cast Aluminum; Color: Natural Aluminum Finish; Exception: When used w/Painted Mast Arm pole/pedestal shall match pole color; w/Stainless Steel hardware; See item “D” Bracket Assemblies for Pedestrian Signal Heads w/Tri-Stud; For mast arm pole or concrete pole mount
FDOT_APL_NOAPPROVALMANUFACTURERDEVICE_DESCRIPTION
6531338040801305/14/1982Cost Cast Inc.PN 1915/Pole End (Curved / Flat)
6531039080804305/12/1994Engineered Castings Inc.PN 2053-F/Pole End - Flat
6531039080805305/12/1994Engineered Castings Inc.PN 2053-C/Pole End - Curved
6591039201103301/08/1988Pelco Products Inc.SE-0357/Hub Plate, Lg. Pole 1-1/2” NPS Alum (Curved)
6591039201103301/08/1988Pelco Products Inc.SE-0415/Hub Plate, Lg. Pole 1-1/2” NPS Alum (Flat)



Transportation Control Systemswww.tcstraffic.com
Engineered Castings Inc.www.ecql.com
Pelco Products Inc.www.pelcoinc.com
McCain Traffic Supplywww.mccaintraffic.com
Signal Safe Inc.(w/Cost Cast)
Eastern Metal Supplywww.easternmetal.com
Cost Cast Inc.www.costcast.com
Thompson Manufacturing Inc.

HISTORY:
PWWM QPL w/FDOT APL reevaluation of improvements per release drawing dated 06/01/09
Addition of Backplates to QPL (09-14-10)
Addition of CCD Camera Bracket to QPL (10-28-10)
Addition of Cost Cast Wire Entrance & Span Wire Hangers to QPL (02-01-11)
Addition of Pole & Base Collar Assembly to QPL (04-20-11)
Addition of Precast Concrete Pedestal Base to QPL (05-31-11)
Addition of Eastern Metal Supply to QPL (09-20-11)
Addition of Signal Head Closure Kit (Pelco) to QPL (09-20-11)
Addition of Anchor Bolts to QPL (10-25-11)
Addition of 6-inch OD Aluminum Pedestals to QPL (10-28-11)
Addition of Aluminum Pedestal Slip Base to QPL (11-03-11)
Addition of Hub Plate Side of Pole to QPL (11-04-11)

Last Modified on : 10/22/2014 11:15:59 AM