Solicitation Details - 20130169 (MCC 7360 Plan) This Solicitation is expired.
Back to Search Solicitations
Push-Button Contract for Roadway Resurfacing
Opening Date :
Opening Time :
Announcement Info :
The work required for this Contract shall include, but is not limited to, the following: Milling and resurfacing, widening and resurfacing of intersecting streets, resurfacing of asphaltic pathways (pedestrian, bicycle, etc.) adjacent or not to the edge of pavement as necessary, temporary utility repairs (cold patches), clearing and excavating of shoulder areas or build-up, as directed by the Engineer; grading and clean-up of adjacent shoulders and removal of roots, as required, pavement markings including the installation of reflective pavement markers (blue/blue) at fire hydrant locations, sidewalk, sidewalk cubs and connectors, and pedestrian ramps. Resurfacing work may include any of the following: a. Application of asphaltic concrete surface course to existing wearing course. b. Application of asphaltic concrete leveling courses to existing wearing surfaces prior to and in preparation for item (a) above. c. Application of asphaltic concrete to previously primed rock roads. d. Resurfacing of private driveways shall be limited to feathering of the asphaltic concrete mat to a point two (2) feet from the edge of the roadway. Resurfacing of the remainder of private driveways is expressly prohibited under this Contract, unless directed by the Engineer. e. The contractor shall adjust all storm water, water and sewer valves and manholes prior to resurfacing. All adjustments shall be made by the built-up method, not by the use of adjustment of rings. LOCATION OF WORK: There are no specific sites identified for this project. Work orders will identify the location, description and amount of work to be accomplished. Work orders will be issued subsequent to the Award of the Contract. Work Order may be subject to the requirements of the Community Work Force Program (CWP).
Technical Certification :
LICENSE REQUIREMENTS: At the time of Bid and pursuant to the requirements of Section 10-3 of the Code of Miami-Dade County, Florida and these Solicitation and Contract Documents, the Bidder must hold a valid, current, and active Certificate of Competency as a General Engineering Contractor or as a Specialty Engineering Contractor, commensurate to the requirements of the Project’s Scope of Work, in one or more engineering crafts to include Paving Engineering. The Specialty Contractor shall subcontract with a qualified contractor any work which is incidental to the specialty but is specified in the aforementioned Code as being the work of other than that of the Engineering Specialty for which certified. Pursuant to Section 255.20, Florida Statues (F.S.) and in lieu of the above, the County may consider a bid from a Bidder that is a duly licensed Contractor in good standing that has been pre-qualified and considered eligible by the Florida Department of Transportation (FDOT) under Section 337.14, F.S. and Chapter 14-2, Florida Administrative Code, to perform the work described in the Contract Documents. Contractors seeking consideration under this paragraph shall submit along with the Bid Documents for review and consideration, current copy (ies) of their FDOT Certificate(s) of Qualification, Certification of Work Underway, and Status of Contract(s) On Hand. Acceptable FDOT prequalification(s) necessary to perform the work specified in the Project’s Scope of Work shall include the Flexible Paving Work Class. The Contractor shall furnish Certificates of Insurance to the County prior to commencing any operations under this Contract. The certificates shall clearly indicate that the Contractor has obtained insurance, in the type, amount and classification required by these Contract Documents.
Download Solicitation/Addendums/RFI/Bidders List
Using Our Site
© 2007 Miami-Dade County. All rights reserved.