Pilot Station Bulkhead Repairs

9/3/2024 2:00:00 PM

Scope of Work: (Contractor must obtain and submit all permits prior to performing any work). The Scope of Work consists of welding steel plates onto the existing steel sheet piles to cover openings causing erosion and loss of retained soil and coating the welded plates with a corrosion resistant product. The above-ground cavity will be backfilled with #57 stone to match existing grade. MINIMUM CONSTRUCTON EXPERIENCE OF THE CONTRACTOR A. With this bid, the successful Bidder shall submit proof that the firm has at least the minimum successful contract experience as required below for this Contract being bid. Such proof shall consist of a list of projects, completed prior to the bid date, with the names and telephone numbers of the owners or representatives that the Department can contact to confirm the listed experience. B. In addition to submittal requirements stated elsewhere, to qualify for work on this Contract, the Bidder shall be experienced in bulkhead repairs. C. The Bidder and/or Key Personnel must have successfully completed the construction and/or rehabilitation of a minimum of three (3) bulkhead repair projects within the last ten (10) years and one (1) project within the last five (5) years. D. In the event a firm is established by executives, supervisors and other senior field staff (key employees) that would have met these minimum experience requirements with a prior firm, Department reserves the right to qualify the firm based on Department's sole determination and evaluation of the knowledge and prior experience of these key employees employed by the new firm. The experience of key senior personnel with other firms may be counted towards the experience requirement, if acceptable to the Engineer. Should such evidence not be satisfactory to the Engineer, whose decision shall be final, the bid will be considered non-responsive, and the second lowest bidder will be considered for award.

General Building Contractor General Engineering Sheet Metal