Last Visited »

Donation Standard Specifications and Details for Design and Construction -- Table

All the files below are presented in  PDF format, or  DWG format where noted.

Part I - Donation Utility Construction
Donation Water Mains
Section Number
Section
Title
Current
Issue Date
UC-000 Donation Water Mains 11-2010
UC-005 Project Approval 5-2010
UC-033 Concrete, Mortar and Grout (Short) 6-2005
UC-055 Structural Work 8-1999
UC-075 Water Service Installations 7-2013
UC-080 Meter Boxes, Sectional Plates and Vaults for Water Service 1-1999
UC-085 Water Meter Valves 1-1999
UC-090 Piling for Aerial Crossing 8-1999
UC-170 Cleaning and Testing Mains 2-2011
UC-175 Disinfection of Mains 1-1999
Donation Wastewater Gravity Systems
UC-250 Gravity Sewer Systems 8-2011
UC-290 Removal of Sanitary Sewerage and Debris 1-1999
UC-300 Gravity Sewer Pipe Foundation 1-1999
UC-310 Gravity Sewer Service Laterals 8-1999
UC-320 Sewerage Bypass Pumping and Flow Control 6-2005
UC-330 Repairs to Department Sewers 8-1999
UC-350 Sewer Deflection Test 1-1999
UC-370 Cleaning and Testing Gravity Sewers 2-2011
Donation Pumping Stations
UC-500 Donation Pump Stations 12-2009
UC-570 Installation of Pump Station 12-2009
UC-600 Pump Station Electrical Material 8-2013
UC-610 Pump Station Control Panel 8-2013
UC-615 Level Controller 8-2013
UC-630 Pump Station Testing 6-2005
Donation Force Mains
UC-750 Donation Force Mains 11-2010
Reclaimed Water Systems
UC-800 Reclaimed Water System Design and Construction Specifications 6-2008



ˆ top

Part II - General Provisions
Division 1 - General Requirements
Section Number
Section
Title
Current
Issue Date
01005 Defined Terms 12-2006
01011 Site Conditions   8-1999
01016 Safety Requirements and Protection of Property 2-2009
01018 Environmental Contamination 2-2009
01031 Grades, Lines and Levels 1-1999
01090 Reference Standards 1-1999
01100 Special Project Procedures 5-2000
01150 Preconstruction Conference 1-1999
01340 Shop Drawings 5-2000
01581 Sub-Aqueous Pipeline Crossing Signage 1-2010
01600 Materials and Equipment Shipping, Handling, Storage and Protection 8-1999
01710 Cleaning 1-1999
01720 Project Record Documents 6-2005
01725 Project As-Builts 1-1999
01730 Operating and Maintenance Data 1-1999
01740 Permits 8-1999
01750 Maintenance of Traffic and Public Streets 8-1999
01775 Magnetic Media Submittals 1-1999



ˆ top

Part III - General Material & Methods of Construction

Divison 2 - Site Work

Section Number
Section
Title
Current
Issue Date
02230 Clearing and Grubbing 8-1999
02260 Steel Sheet Piling 1-1999
02314 Excavation, Backfill and Fill for Structural
Facility and Utility System
8-1999
02315 Trenching and Backfilling for Piping Systems 8-1999
02536 Precast Manholes & Covers 11-2013
02615 Concrete Protective Liner System for Precast Structures 8-1999
02625 Sanitary Sewer Manhole Infiltration Insert 3-2011
02741 Prime and Tack Coats 1-1999
02745 Pavement Removal and Replacement 8-1999
02765 Pavement Markings and Traffic Signs 1-1999
02822 Chain Link Fences and Gates 2-2009
02900 Landscaping 5-2010

Divison 3 - Concrete

03300 Cast-in-place Concrete, Reinforcing and
Formwork
5-2009
03375 Flowable Fill 5-2011
03400 Precast Prestressed Concrete 1-1999
03521 Insulating Concrete Fill 1-1999
03600 Grout 1-1999

Divison 4 - Masonry

04060 Mortar 1-1999
04082 Joint Reinforcement 1-1999
04220 Unit Masonry 1-1999

Divison 5 - Metals

05120 Miscellaneous and Structural Steel 1-1999
05140 Structural Aluminum 1-1999
05520 Aluminum Railings 1-1999
05540 Access Hatches 8-1999
05550 Castings 8-1999

Divison 6 - Wood and Plastics

  (Not Used)  

Divison 7 - Thermal and Moisture Protection

07500 Built-up Bituminous Roofing and Sheet
Metal Over Lightweight Insulating Concrete
Substrate or Structural Concrete Deck
1-1999
07920 Sealants and Caulking 1-1999

Divison 8 - Door and Windows

08110 Steel Doors and Frames 6-2005
08710 Finish Hardware 1-1999
08720 Aluminum Louvers 6-2005

Divison 9 - Finishes

09801 Concrete Protecting Coatings 1-1999
09900 Painting (Short) 7-2012

Divison 10 - Specialties

  (Not Used)  

Divison 11 - Equipment

11205 Submersible Wastewater Pumps 6-2005
11210 Vertical (Dry-Pit) Centrifugal Sewage Pumps 8-1999
11215 Sump Pump 8-1999
11500 Fuel Storage Tanks 8-2013

Divison 12 through 13

  (Not Used)  

Divison 14 - Conveying System

14050 Crane, Trolley and Hoist 1-1999
14060 Hoist and Trolley 1-1999

Divison 15 - Mechanical

15010 Basic Mechanical Requirements 1-1999
15040 Seal Water System 8-1999
15060 Piping and Fittings 7-2011
15065 Miscellaneous Materials 8-2011
15070 Jacking and Boring 1-1999
15075 Aerial Crossing 8-1999
15080 Horizontal Directional Drilling 1-1999
15100 Valves, General 1-1999
15102 Tapping Sleeves 12-2006
15105 Ball Valves 8-1999
15110 Butterfly Valves 8-1999
15115 Check Valves 1-1999
15120 Gate Valves 12-2006
15125 Plug Valves 8-2013
15130 Miscellaneous Valves 8-2013
15330 Fire Hydrants 12-2006
15821 Dehumidifier 1-1999
15860 Air Moving Equipment 12-2009

Divison 16 - Electrical

16152 Variable Frequency Drives 12-2009
16420 Stationary Standby Engine/Generator Set 6-2005
16425 Portable Engine-Generator Sets 12-2006
16780 S. C. A. D. A. System R. T. U. Installation 12-2006



ˆ top

Part IV - MDWASD Standard Details
General Details
Detail Number
Description
Sheet Number
GS 0.5 Standard Requirements for Water and Sewer Construction 1 of 2
GS 0.5 As-Built Requirements 2 of 2
GS 1.0 Typical Tie-Rod Details 1 of 1
GS 1.2 Reinforced Concrete Slab (For Ground Cover less than 2.5') 1 of 1
GS 1.3 Buttweld for Field Welding 1 of 1
GS 1.4 Pipe Guard (12" Pipe and Larger) 1 of 2
GS 1.4 Pipe Guard Bolt Detail 2 of 2
GS 1.5 Water and Sewer Main Crossings 1 of 1
GS 1.6 Access Manhole for Concrete Pipe (30" and Larger) 1 of 1
GS 1.7 Typical Tapping Valve Setting (16" and Smaller) 1 of 1
GS 1.8 Tapping Sleeve and Valve Installation 1 of 1
GS 1.9 Typical Trench Backfill for D.I. Water and Force Mains 1 of 1
GS 2.0 Standard Requirements for Water & Sewer Mechanical Thrust Restraint 1 of 5
GS 2.0 Thrust Restraint Design Ductile Iron/PVC Pipe (Vertical Offset) 2 of 5
GS 2.0 Thrust Restraint Design Ductile Iron/PVC Pipe (Tee and Tapping Sleeve) 3 of 5
GS 2.0 Thrust Restraint Design Ductile Iron/PVC Pipe (Dead Ends) 4 of 5
GS 2.0 Thrust Restraint Design Ductile Iron/PVC Pipe (Horizontal Bends) 5 of 5
GS 2.1 Embankment Typical Section 1 of 1
GS 3.0 Standard Symbols 1 of 2
GS 3.0 Standard Symbols 2 of 2
GS 4.0 Sign Details 1 of 2
GS 4.0 Sign Post Installation 2 of 2
Water Detail
WS 1.0 Typical Gate Valve Setting (Smaller than 16") 1 of 1
WS 1.60 Air Release Valve 1 of 1
WS 1.61 Typical Flushing Valve Outlet 1 of 1
Water Box and Vault Details
WS 2.05 Casting Standards 1 of 1
WS 2.10 Single Meter Box Installation 1 of 3
WS 2.10 Single Meter Box Detail 2 of 3
WS 2.10 Single Meter Box for Multi-Story Building 3 of 3
WS 2.12 Dual Meter Box 1 of 2
WS 2.12 Dual Meter Box Installation for two 5/8" Meters 2 of 2
WS 2.16 Typical 2" Service Installation with a 2" meter 1 of 4
WS 2.16 Typical 2" Service Installation with a 1-1/2" meter 2 of 4
WS 2.16 Typical 1" Service Connections (Copper or HDPE) 3 of 4
WS 2.16 Typical 2" Service Connections (HDPE) 4 of 4
WS 2.17 Assembled 2' x 4' Vault (Precast Sections) 1 of 5
WS 2.17 Assembled 2' x 4' Vault (Precast Sections) 2 of 5
WS 2.17 Standard 2' x 4' Steel Cover Plate for Non-Traffic Vault 3 of 5
WS 2.17 Details of 2' x 4' Steel Cover Plate for Non-Traffic Vault 4 of 5
WS 2.17 2' x 4' Precast Meter Vault for Non-Traffic Areas 5 of 5
WS 2.19 Standard Precast Meter Vault for Traffic Areas 1 of 1
WS 2.20 4' x 4' Precast Sectional Meter Vaults for Non-Traffic Areas 1 of 2
WS 2.20 4' x 4' Precast Meter Vault for Non-Traffic Areas 2 of 2
WS 2.21 Easement Requirements for Service & Fire Hydrants 1 of 3
WS 2.21 Easement Requirements for 8" Turbine Meter 2 of 3
WS 2.21 Easement Requirements for 10" Turbine Meter 3 of 3
WS 2.30 8-Inch Blow-Off Detail for a 20” D.I. Distribution Main 1 of 1
WS 2.40 Typical Installations for Medical Facilities or Any Other Facilities Req. by WASD 1 of 1
Water Piping Details
WS 3.10 No. 2 C.I. Valve Box and Lid 1 of 1
WS 3.11 No. 3 C.I. Valve Box 1 of 2
WS 3.11 No. 3 C.I. Lid 2 of 2
WS 3.12 Typical M.J. Butterfly Valve (24" and Smaller) 1 of 1
WS 3.13 Leak Detector/Sampling Port Assembly Detail 1 of 1
WS 3.14 Manhole for Butterfly Valve (30" and Larger) 1 of 3
WS 3.14 Manhole for Butterfly Valve (30" and Larger) 2 of 3
WS 3.14 Manhole for Butterfly Valve (30" and Larger) 3 of 3
WS 3.15 Steel Cover Assembly for No. 66-S Concrete Meter Box 1 of 2
WS 3.15 Standard 34"x34" Steel Cover Plate for Non-traffic Areas Only 2 of 2
WS 4.10 Typical Service Plan 1 of 1
WS 4.12 Typical Connection to Existing Main 1 of 2
WS 4.12 Typical Connection to Existing Main 2 of 2
WS 4.13 Typical 2" Galvanized Steel Connection to Existing Main 1 of 1
WS 4.16 Meter Bank – 2” Supply 1 of 2
WS 4.16 Meter Bank – 4” Supply 2 of 2
WS 4.18 Reduced Pressure Zone Backflow Preventer for Water Service 3/4" thru 2" 1 of 5
WS 4.18 Reduced Pressure Zone Backflow Preventer for Water Service 2-1/2" thru 10" 2 of 5
WS 4.18 Reduced Pressure Zone Backflow Preventer for Water Service - Notes 3 of 5
WS 4.18 Approved Backflow Prevention Assemblies - Notes 4 of 5
WS 4.18 Approved Backflow Prevention Assemblies for Vertical Installation - Notes 5 of 5
WS 4.19 Pressure Vacuum Breaker, Irrigation System Only 1 of 2
WS 4.19 Pressure Vacuum Breaker, Irrigation System - Notes 2 of 2
WS 4.20 Typical Fire and Fire & Domestic Water Service Connections 1 of 4
WS 4.20 Double Detector Check Valve Assembly for Fire Line Service 2 of 4
WS 4.20 Double Detector Check Valve Assembly for Fire Line Service - Notes 3 of 4
WS 4.20 Double Detector Check Valve in Parallel 4 of 4
WS 4.21 Typical Pipe Layout for 4" Service 1 of 2
WS 4.21 Typical Pipe Layout for Domestic and Irrigation Service 2 of 2
WS 4.50 Typical Fire Hydrant Installation with Guard Posts 1 of 2
WS 4.50 Typical Fire Hydrant Installation in FDOT Right-of-Way 2 of 2
WS 4.60 Water Main Crossing Drainage Ditch 1 of 1
Reclaimed Water Details
RGN 1.0 Reclaimed Water Mains, General Notes 1 of 2
RGN 1.0 Reclaimed Water Mains, General Notes 2 of 2
R 1.0 Sign Post Installation 1 of 1
R 2.0 Typical Residential Utility Layout Single Service Connections 1 of 1
R 3.0 Residential Service Connection 1 of 1
R 4.0 Pipe Identification 1 of 1
R 5.0 Locating Devices for Non-Metallic Pipe 1 of 1
Sewer Details
SS 1.0 Gravity Sewer Service Lateral for "Shallow" Sewers 1 of 2
SS 1.0 Gravity Sewer Service Lateral for "Deep" Sewers 2 of 2
SS 3.1 Wye Branch Connection for Existing Shallow Main 1 of 1
SS 3.2 Saddle Tee Fastened to Gravity Sewer Main Liner 1 of 1
SS 4.0 Type "A" Manhole Cover and Frame 1 of 2
SS 4.0 Type "A" Manhole Cover and Frame 2 of 2
SS 5.0 Sewer Main or Lateral thru Drainage Ditch 1 of 1
SS 6.0 Standard Manhole 1 of 1
SS 6.1 Standard Manhole, Flow Channels 1 of 1
SS 6.2 New Connection to Existing Manhole (Where no Stub-Out Exists) 1 of 1
SS 7.0 Shallow Manhole 1 of 1
SS 8.0 Detail Manhole Adjustment 1 of 1
SS 9.0 Drop Connection - New Precast Manhole 1 of 1
SS 10.0 Flow Patterns for Invert Channels 1 of 1
SS 11.0 Air Release Valve Assembly - Sewage Force Mains 1 of 2
SS 11.0 Automatic Air Release Valve Assembly 2 of 2
SS 13.0 No. 53 C.I. Valve Box and Lid 1 of 1
SS 15.0 Check Valve Manhole 1 of 1
SS 16.0 6" Plug Valve and Check Valve Manhole 1 of 1
SS 17.0 Force Main Connection Private Ownership 1 of 1
SS 18.0 Typical Trench Construction for V.C. and D.I. Pipe Gravity Sewer 1 of 3
SS 18.0 Typical Trench Construction - PVC Pipe Gravity Sewers in Stable Soils 2 of 3
SS 18.0 Typical Trench Construction - PVC Pipe Gravity Sewers in Unstable Soils 3 of 3
SS 19.1 Typical Plug Valve Installation 1 of 1
SS 21.0 Manhole/Valve Box in Grass Areas 1 of 1
SS 22.0 Sanitary Sewer Clean-Out Lid Detail 1 of 2
SS 22.0 Concrete Box for Use with Sanitary Sewer Clean-outs 2 of 2
Accessory Details
A 1.0 Pavement Restoration - Type I 1 of 1
A 1.1 Pavement Restoration - Type V 1 of 1
A 1.2 Pavement Restoration - Type II (State Road) 1 of 1
A 2.0 Pavement Restoration - Type III 1 of 1
A 3.0 Pavement Restoration - Type IV 1 of 1
A 4.0 Pavement Restoration - Type M 1 of 1
A 8.0 Support for Carrier Pipe inside Casing 1 of 1
A 9.0 Polyethylene Encasement for Ductile Iron Pipe 1 of 1
A 10.0 Abbreviations for Department's Projects 1 of 3
A 10.0 Abbreviations for Department's Projects 2 of 3
A 10.0 Abbreviations for Department's Projects 3 of 3



ˆ top

Part V - Appendices

Appendix A - Pump Station Design Package
Pump Station Design Package (PSDP-4/96) (3 Pages)
Pump Station Technical Plans Review and Approval Transfer Form (PSPR-4/96) (1 Page)

Appendix B - Supplemental Design Guidelines for Lift Stations and Force Mains (66 pages)
(Developed through WASD Pump Station Improvement Program, May 1994, Revised Jan. 1999)

Appendix C - Sewer Pump Station Guidelines (3 Pages)
(Developed by WASD Engineering Division Staff, Revised Jan. 1999)

Appendix D - Basic Guide to Corrosion Protection (24 Pages)
(Developed by WASD Engineering Division Staff, May 1996)

Appendix E - Standard Pump Station Drawings

 

 Submersible Pump Station With Stand By Generator
Sheet No.
Title
PDF
DWG
C-1 Cover Sheet
C-2 Site Plan, Legend and Notes
S-1 Structural General Notes
S-2 Wet Well and Vault Valve Structural Plan, Sections and Details
M-1 Mechanical Plan, Sections, Details and Pump Data
E-1 Electrical General Notes
E-2 Electrical Site Plan
E-3A Power/Control (MPE) and Wiring Schedule
E-3B MultiSmart Control and Scada Terminals
E-4 Electrical Control Panel
E-5 R.T.U. Installation Wiring Diagrams
  Submersible Pump Station Without Stand By Generator
C-1 Cover Sheet
C-2 Site Plan, Legend and Notes
S-1 Structural General Notes
S-2 Wet Well and Vault Valve Structural Plan, Sections and Details
M-1 Mechanical Plan, Sections, Details and Pump Data
E-1 Electrical General Notes
E-2 Electrical Site Plan
E-3A Power/Control (MPE) and Wiring Schedule
E-3B Power/Control (MultiSmart) and Wiring Schedule
E-4 Electrical Control Panel and Details
E-5 R.T.U. Installation Wiring Diagrams
 Dry Well/Wet Well Pump Station
Sheet No.
Title
PDF
DWG
C-1 Cover Sheet
C-2 Site Plan, Legend and Notes
A-1 Emergency Generator Building, Floor Plan, Sections and Details
S-1 Structural General Notes
S-2 10' x 10' Dry Well w/8' Wet Well Structural Plan, Section and Details
S-3 Ladder Details
S-4 Grating Platform
S-5 Emergency Generator Building Foundation Plan, Floor Plan and Sections
M-1 10' x 10' Dry Well w/8' Wet Well Mechanical Plan, Sections and Pump Data
M-2 Mechanical Details
M-3 Fuel Tank
E-1 Electrical General Notes
E-2 Electrical Site Plan
E-3A Power/Control (MPE) and Wiring Schedule
E-3B Power/Control (MultiSmart) and Wiring Schedule
E-4 Electrical Control Panel and Details
E-5 R.T.U. Installation Wiring Diagrams
E-6 Emergency Generator Building Electrical Floor Plan and Legend

 

Appendix F - Turbine Meter Guidelines

Sheet No.
Title
PDF
DWG
Drawing No.
WM-1 Water Main Turbine Meter Design Guide Plan, Sections and Details

 

 

W-00000-A

If you cannot view PDF Get Acrobat! files, you can download Acrobat Reader  for free from Adobe Systems, Inc. In order to use PDF files, you must have Acrobat installed on your computer.

Back to Top Page Last Edited: Wed Nov 13, 2013 3:12:26 PM
water

Construction Information

Construction Complaint Unit
(Non-billing)
786-552-8970

 

Call Before You Dig
Sunshine State One Call of Florida
Call 8-1-1
www.callsunshine.com

 

Read the Water & Sewer Department's
Rules & Regulations

Implementing Order 10-8

 

 
 
Corner
  • Facebook Twitter YouTube RSS
  • Print Print Email this page Email Page   | Bookmark and Share
  • Minimize Tools
Corner

You are now leaving the official website of Miami-Dade County government. Please be aware that when you exit this site, you are no longer protected by our privacy or security policies. Miami-Dade County is not responsible for the content provided on linked sites. The provision of links to these external sites does not constitute an endorsement.

Please click 'OK' to be sent to the new site, or Click 'Cancel' to go back.